>
Productos >
Productos electrónicos >
Cableado del sistema de control >
Módulo de interfaz >
Interface module-DM50-IDC-10-10-4Y-00A(H)
.jpg)
Interface module-DM50-IDC-10-10-4Y-00A(H)
30040000056
IDC module,input/output module,with screw connector and IDC stitching line,can be installed on DIN35 rail,10 positions
channels
- 10
- 20
- 26
- 34
- 40
- 50
current
- 1A
width of panel
- 50mm
- 72mm
- Visión general
- Datos técnicos
- Accesorios
- Zertifizierung
- Datos empresariales
- Download
Ventajas del producto
10digits to 50digits1:1 connection
Screw connection
- Modelo 3D
- Dimension
- Environmental data
- Standards/Regulations
- Technical data
- Connection data 1
- Connection data 2
Modelo 3D
Dimension
| length | 66mm |
| width | 57mm |
| Height | 44mm |
Environmental data
| Ambient temperature (operation) | -20 °C ... 70 °C |
| Ambient temperature (storage / transport) | -20 °C ... 70 °C |
Standards/Regulations
| Standards/Regulations | IEC61810 |
| Pollution level | 3 |
| Overvoltage category | Ⅲ |
| Rated overvoltage | 0.5kV |
| Flame retardant grade, in line with UL94 | V0 |
Technical data
| Installation location | Arbitrary |
| Maximum allowable working voltage | 30VDC |
| Maximum allowable current | 1A |
| Signal points | 10 |
| Status Display | no |
Connection data 1
| Connection name | Control system side |
| Connection method | IDC connection |
| Connection volume | 1 |
| Number of digits | 10 |
| spacing | 2.54mm |
Connection data 2
| Connection name | On-site side |
| Stripping length | 6-7mm |
| Cross section of flexible conductor | 1.0 mm² ... 2.5 mm² |
| Connectable guide cross section AWG | 28-12AWG |
| Connection meets standards | UL1059 |
| Connection method | Screw connection |
| Connection volume | 1 |
| Number of digits | 10 |
| screw thread | M3 |
| Hard wire cross section | 1.0 mm² ... 2.5 mm² |
Accessories
| Wire harness | DX211-1S-500-00A(H) |
| Número de pedido | 30040000056 |
| Unidad de embalaje | 6 |
| Cantidad mínima de pedido | 12 |
| Peso del producto (sin embalaje) | 55 |
Passende Teile
- Alle Unterstützenden Produkte（2）
- Verwandte Produkte（2）
Nach Produktparametern Filtern
MIL cable-DX211-1S-500-00A(H)
MIL cable,connector1:IDC/MIL female connector（1×34 Core,90° output）,connector2:IDC/MIL female connector（1×40 Core,90° output）
MIL cable-DX211-2S-500-00A(H)
MIL cable,connector1:IDC/MIL female connector（1×34 Core,90° output）,connector2:IDC/MIL female connector（1×40 Core,90° output）
FCN Interface Module
I/O Interface Module, can access binary or ternary NPN signal, with indicator light, with screw connection, can be installed on DIN35 rail, 8/16 bit
MDR Interface Module
MDR module, input/output module, with screw connection and MDR connector, can be installed on DIN35 rail, 20-50 positions
